First measurement of the rho spectral function in high-energy nuclear collisions

We report on a precision measurement of low-mass muon pairs in 158 AGeV indium-indium collisions at the CERN SPS. A significant excess of pairs is observed above the yield expected from neutral meson decays. The unprecedented sample size of 360,000 dimuons and the good mass resolution of about 2% allow us to isolate the excess by subtraction of the decay sources. The shape of the resulting mass spectrum is consistent with a dominant contribution from pi+pi- -->rho -->mu+mu- annihilation. The associated space-time averaged spectral function shows a strong broadening, but essentially no shift in mass. This may rule out theoretical models linking hadron masses directly to the chiral condensate.     

Comb-shaped 2-Methylimidazolium Poly(arylene ether sulfone) Anion Exchange Membranes with High Alkaline Stability

A series of comb-shaped poly(arylene ether sulfone)s containing pendant 2-methyl-3-alkylimidazolitun group(ImPAES-Cx,x=1,6,10)was prepared and characterized as novel anion exchange membranes.These Im-PAES-Cx membranes were obtained by benzylic bromination and imidazolium functionalization.The characteristic nano-phase separation structure was formed in membranes with longer alkyl side chains,as confmned by small-angle X-ray scattering.The nano-phase separation structures endowed ImPAES-Cx membranes with improved ionic conductivity,dimensional stability(at least 60% decrease water uptake and swelling ratio at 60℃)and mechanical properties,together with excellent alkaline stability.Especially,ImPAES-C6 membranes possessed enhanced hydroxide conductivity and chemical stability simultaneously.These results suggest that it is a feasible strategy to introduce appropriate length of alkyl side chains into anion exchange membranes(AEMs)to improve the performance.     

Cu-ZnO-CeO2催化剂组成对CO2加H2合成甲醇性能的影响

采用并流沉淀法分别制备了CuO-CeO₂（物质的量比为5：1）、CuO-ZnO（物质的量比为5：4）、CuO-ZnO-CeO₂（物质的量比为5：4：1）三组目标催化剂,通过X射线衍射（XRD）、氢气升温还原（H₂-TPR）、CO₂程序升温脱附（CO₂-TPD）、氮气吸附-脱附、X射线光电子能谱（XPS）、N₂O滴定表征技术对催化剂的物化性能进行了测试,并在高温高压微催化反应器中对催化剂进行活性评价。研究了CuO-ZnO-CeO₂组成对CO₂加氢合成甲醇的影响。结果表明,与二组分催化剂相比较,三组分CuO-ZnO-CeO₂催化剂物化性能及催化活性发生了很大变化,催化剂表面碱性位增强,热稳定性增强,CuO颗粒粒径变小,铜分散度以及氧空位浓度提高,最终催化活性显著提高。其中,CuO-ZnO-CeO₂催化剂中,CuO颗粒粒径为8.2nm,铜的比表面积为68.4m²/g,铜分散度为7.19%,甲醇的选择性和收率分别为48.6%和0.057mmol/（g·min）,催化剂活性较好。     

Hollow-glass-microsphere-based Biphenyl Epoxy Resin Composite with Low Dielectric Contant

In this study, rigid 4,4'-diglycidyl(3,3',5,5'-tetramethylbiphenyl) epoxy(TMBP)-based composites were developed by the incorporation of varying percentages of commercial hollow glass microspheres(HGMs, QH-450) into the TMBP resin used for electronic packaging. The thermal and mechanical properties as well as the morphology of all the composites were characterized, and dielectric properties were characterized by advanced analytical techniques. The results reveal that a series of TMBP/QH-450 composites exhibits higher initial degradation temperatures(T_d,5%>300℃), and the residual char and glass transition temperature were clearly improved with QH-450 loading. In addition, all epoxy composites exhibited a lower dielectric constant ranging from 3.74 to 3.06 at 1.2 MHz because the lower dielectric properties of the inert gas used as the core of the QH-450 decreased molecule polarity. Hence, this developed TMBP/QH450 system demonstrates potential applications in electronic packaging.     

光纤陀螺标度因数的测试误差分析

为了进一步提高光纤陀螺标度因数的测试精度,对光纤陀螺标度因数测试过程进行理论分析,确定了影响光纤陀螺标度因数测试误差的主要因素,并进行了计算机仿真和实验验证。结果表明:由于安装误差、北向地速分量以及转台速率精度的影响,光纤陀螺测试起始位置和采样时间的选择均会给小速率标度因数不对称性和非线性度的测试带来误差,而大速率标度因数的测试基本不受影响;通过对各输入速率点进行整圈采样,可以有效地降低小速率标度因数的测试误差,使其测试精度提高1个量级以上,实现对光纤陀螺标度因数性能更加准确的测试。     

环氧基修饰周期性介孔有机氧化硅对漆酶的固定化作用

以三嵌段共聚物P123为模板剂, 在酸性条件下通过1,2-三乙氧基硅基乙烷(BTESE)和3-含氧缩水甘油基-丙基-三甲氧基硅烷(GPTMS)共水解缩聚合成环氧基修饰的周期性介孔氧化硅(PMOs), 以修饰后的PMOs为载体对漆酶进行固定化, 研究了环氧基修饰对固定化酶稳定性的影响. 通过XRD、TEM、固态NMR和N₂吸附等手段表征材料的修饰效果、孔结构以及漆酶的固定化. 结果表明, 修饰后的材料保持良好的孔结构, 环氧基的修饰有利于提高固定化酶的活力, 基于环氧基修饰PMOs的固定化酶具有较高稳定性.     

Influence of Mixing Conditions on Morphologies and Properties of MMT/Epoxy Resin Composite Materials

Montmorillonite(MMT) was directly modified with hexadecyl trimethyl ammonium bromide. The interlayer spacing of the organophilic montmorillonite(organo-MMT) corresponding to the d(001) plane peak was 2.21 nm. The influences of the content of organo-MMT and mixing conditions including mixing temperature and mixing time on the intercalation and exfoliation structures of MMT/epoxy resin composites were investigated by wide X-ray diffraction(WXRD). The X-ray patterns reveal that organo-MMT was intercalated by the epoxy resin during mixing process. Only under certain mixing conditions, could the exfoliation nanocomposites be formed. The mechanical and thermal properties of the composites were measured. The results indicate that the composites have better mechanical properties and higher Tg than those of the pristine epoxy resin.     

应用差异光谱法建立绵羊采食复杂日粮干物质消化率模型的研究

研究旨在探讨利用放牧家畜“日粮—粪”差异光谱,建立干物质消化率模型的可行性。通过人工混合复杂日粮饲喂绵羊进行室内代谢试验,获得104份“日粮—粪”样品对,同时将相应的日粮和粪光谱做差获得104份差异光谱,将70份用于建模,34份用于检验。结合偏最小二乘法,利用差异光谱建立绵羊在采食成分较复杂时干物质消化率预测模型。最佳光谱范围为8 656～4 310 cm-1;光谱预处理方法以多元散射校正+一阶导数处理+Norris平滑(MSC+1st Deriv+Norris)处理的效果最好,最佳主因子数为7。经外部检验得到预测标准误差(RMSEP)为2.46%,相对标准误差(RPD)大于2.5,预测值与实际值的决定系数为0.833 9,说明所建近红外模型具有较好的预测效果。     

直接沉淀法制备纳米ZnO及表征

以硫酸锌和碳酸铵为原料,采用直接沉淀法制备了纳米ZnO,并探讨了浓度、温度、时间、洗涤液及操作方式等因素对样品的影响;采用GT-DTA、FT-IR、XRD、BET等对前驱物和纳米ZnO粉体结构和形貌进行了表征,结果表明:前驱物是[Zn5(OH)6(Co3)2],前驱物在300C培烧2h得到的纳米ZnO的粒径为15-22nm左右,分布较均匀、纯度高,并发现纳米晶须形状ZnO.     

离子交换树脂法制备纳米ZnS

以Zn(NO3)2·6H2O为锌源,Na2S为硫源,采用强碱性阴离子交换树脂法制备了纳米ZnS,并对形成的ZnS纳米粒子进行了XRD、TEM表征.XRD表征计算结果表明样品约为粒径6-10nm的小颗粒,TEM表征结果可观察到样品为由6-10nm的小颗粒团聚而成的50-80nm的大颗粒组成的.